The SingClean - Made for a Clean Sing! Important Notice: Help stop the spreading of Herpes! Did you know that 4 out of 5 people have Herpes today? Make sure you use a SingClean whenever and wherever you sing! WE NOW OFFER DROP SHIPPING FROM OUR FACTORY HERE IN ARIZONA WITHIN THE CONTINENTAL USA. THIS WILL ALLOW YOU TO PLACE THE SINGCLEAN ON YOUR WEB SITE USING OUR WEB PHOTO WITH NO OBLIGATION! ***GIVE IT A TRY - WHAT HAVE YOU GOT TO LOOSE!*** (Just email us at erthbnd@hotmail.com and we will send you wholesale pricing along with any other information you may need or give us a call toll free at 877-323-7246!) Why pass a friend the flu, or worse yet, get sick yourself? The SingClean (a one-hand microphone press system) is celebrating its seventh year in the marketplace, and in that time we have protected thousands of singers from passing viruses and germs on the microphones they use when performing.   The SingClean is an extremely easy to use all-in-one microphone and hand sanitizing dispenser with microphone holder that attaches to any microphone stand and virtually eliminates 99.9% of germs and bacteria on contact! Our newest and most improved model yet features a sleek design that secures a 4 oz bottle of clear, unscented, sanitizing solution that atomizes a microphone over 300 times -- that's weeks of safe microphone hygiene! Every SingClean easily slides onto any microphone stand for the personal convenience of any singer. Furthermore, the improved model allows the user to quickly retrieve the microphone, press once, and sanitize, using one hand, all-in-one shot.   All of our satisfied customers depend on the SingClean for safe microphone hygiene and good singing health. Let's all practice safe singing for the 21st Century!

Easy "SingClean" Microphone Sanitizer and Holder Instructions below..... INSTRUCTIONS: 1. Remove the clear plastic cap. Important: Pump sprayer a couple of times to prime dip tube. Unscrew sprayer from the 4 oz bottle and remove sprayer along with black flat washer.   2. Place the black flat washer on large round hole between top and bottom plates. Now gently place sprayer dip tube through hole and position sprayer between both plates until cap touches the top plate and silver elastic strap. 3. Make sure that the nozzle is facing forward. (The elastic strap will keep the sray nozzle facing forward at all times.) 4. Replace bottle back into sprayer assembly and tighten. 5. Attach the SingClean to your microphone stand as follows: Remove the microphone clip, if needed, and threaded ring nut. If you do not have a microphone stand, your SingClean may be placed on any flat surface available. In this case, you will need to hold the bottle while activating the paddle for sanitizing. (Back View Below) 6. Slide the SingClean onto the microphone stand. After first plate is on, replace the threaded ring nut as shown. (This will keep the SingClean from sliding all the way down.) You can also replace your the microphone clip back onto the top microphone stand after the SingClean has been attached.   7. You can slide the SingClean all the way down on your microphone stand if you wish, as long as the microphone stand tightening grip is not too large or interferes with activating the paddle properly while atomizing your microphone. 8. Depress the SingClean paddle to atomize the microphone ONLY ONCE, do not over saturage the microphone. The sanitizing solution continues killing bacteria for at least 30 minutes or longer so you can sing clean! Be sure to press the front edge of the paddle down with the microphone as close to the edge as possible in order for the spray to mist through the large paddle hole. The paddle hole also makes a great microphone holder as shown in the picture at the top of the page! To use as a hand sanitizer, simply press the paddle down with the edge of your palm and rub hands together to sanitize! CAUTION: Do Not look Directly into the sprayer while activating the atomizer to avoid eye contact!